Gas-fueled burners are in high demand as the need for cooking and warming food grows, making it more manageable. While it offers you the convenience, you light it one day, and the burner starts making a different noise than your typical gas oven sound. You hear a whooshing, popping, or puffing noise, and even worse, it begins to sound like a blowtorch.
Oh, my word, you think this thing is not right and wondering what can be wrong. The fact is when you detect an unusual commotion, instead of the gas broiler, it has some mechanical fault. The gas cooker has different important parts and determining which part of your ovens causing the situation takes time. We will disclose some factors responsible for finding out what the gas oven sounds like it keeps lighting with techniques to fix it.
Why Does Your gas oven sounds like a blowtorch?
Compared to the regular gas cooker sounds, one with a blow torch noise can result for many reasons:
There is a Broken Igniter
The ignitor aids the gas to come through the valve and might be malfunctioning. When you have a defective ignition, it can cause a blowlamp sound. You may have used it for an extended period, or it’s too dirty. To fix the problem, you can change it out with a new one. However, you will need the skills as well. The sound could be a result of a failing glow bar that supports igniting the apparatus.
You find it mostly in gas-range electric equipment. It works like a heating coil to automatically open when it gets hot. In contrast, the electrical current aids it to reach the required temperature for the automatic valve to open. The delay results in the whooshing noise as more gas needs to burn around the ignitor. You can resolve the problem by removing it following these steps:
- The first step is to detach the gas and electrical supply.
- Put on your safety gloves to prevent damaging the parts with oil on your hands, especially the carbide electrode.
- Remove all the trays and the bottom inset inside the unit by unscrewing the screws.
- Once done, you will see the glow bar exposed and generally connected to a wired harness in a console with a screw.
- Extract the bolt and the part from the bracket while disconnecting it from the wire harness.
- Place the new piece and secure it with the fastener.
- Close up the panel and reconnect it to your electrical power and turn on the gas.
Faulty Regulator Valve
The component dictates the amount of gas to move to the burners. When it has a high rate of gas discharge, it causes it to sound like a blowtorch. All you need to do is to alter it to stop the increased flow of gas. You can do this by watching the following video to help.
However, if the sound remains, it’s time to call a professional to do a complete regulator valve replacement. Moreover, after replacing the part and still producing a sound, you need to check the gas force. You can do this with the following process:
- Sliding out the unit if it is in a cabinet.
- You find it located on the back of your appliance.
- Review if it is in the open position and if not, turn it on.
- Switch on your range and see if it is burning correctly.
Monitor the Gas Pressure
Regulator valves provide the purpose of regulating the gas force in the oven. If you have a perfect working regulator valve, it means the demand for gas needs no worrying. But if you find after installing the new equipment, the oven produces sound; gas pressure needs checking.
A Faulty Flame Supervision Device
The FSD supports disconnecting the gas discharge to the burner once sensing the flames have been extinguished. The component can be another cause why it produced a blow torch noise. You can eliminate the noise by having it replaced. Furthermore, if you have a misaligned ignitor, it can also cause similar noises.
Other Gas Burner Sound Issues
While the blowlamp sound happens, there are others as well:
Gas Oven Makes Puffing Sound
The sound could be similar to the blow torch caused by a damaged gas valve and happens when too much gas reaches the igniter before the ignition occurs. Here it helps if you get expert advice to change or repair it.
You can also adjust the air shutter as it regulates the oxygen amount to mix with the gas. Furthermore, you will notice a yellow flame when it burns to result from incomplete combustion of the gas. A burner that is properly combusted is blue.
The air shutters are metal collar and need a specific ratio of air/fuel for working correctly. If you replace the component, adjusting the shutter, and still produce this sound, it’s best to replace it with a new one. Here you can find some great options available.
Gas Oven Sounds Like it Keeps Lighting
You detect a clicking roaring noise after the burner switches off and a common problem. The cause can be accumulated grease around the ignitor, or the injector needs cleaning. All it needs is a proper clean to fix the problem. Another issue can result from misaligned burner caps, and to align them correctly, you need to remove the grate.
Once doing this, all it needs is a gentle push to let it fall into the groove to prevent it from slipping around. One more cause is moisture deposition accumulating around the igniter as water spills onto it. With conventional cleaning, you can resolve the dilemma and best to keep your machine dry after use. You can use a paper towel or hair dryer.
Booming Noise
The boom noise is alarming to make you think your unit is going to cause an explosion. The cause is too much accumulation of gas, and a delayed ignition is the cause. You can solve it by wiping the ignitor and will need to remove it first. You need to follow the same technique in the blow torch method and clean dust and debris. If the problem continues, it may need replacing.
Final Thoughts
Different constituents are mentioned to show you how to fix a problem if your gas stoves make various noises. A blowtorch noise is high pitched, and other noises also warn that your apparatus needs fixing. It helps if you never ignored these warning signs, and with a complete checkup, you can fix the problem. However, if the problem persists, the recommended thing is to take it to a technician to repair it.